turning on turn signal/hazards turns off instrument cluster power, 2001 T&C

Discussion in 'General Motoring' started by bba7, May 8, 2006.

  1. bba7

    bba7 Guest

    2001 Chrysler Town and Country
    vehicle running, turn on either turn signal or hazard light switch.
    lose power to instrument cluster (fuel gauge, status lights,
    speedometer, odometer, etc.).
    turn signal indicators flash, but actual turn signal lights do not.
    vehicle still runs, all other electircal devices function (radio,
    interior lights, etc.) except instrument cluster.
    turn off turn signal or hazard light switch, power returns.

    swapped related relays and fuses, wasn't the problem.

    suspect the flasher, but local Chrysler dealer can't find a part number
    for one, and I don't know where it is on the vehicle.


    bba7, May 8, 2006
  2. bba7

    Ace Guest

    Your big symptom is that your bulbs don't light. And the first thing to
    try is the bulbs. Not sure what thetype is but I would think the
    AutoZone would have them. Replace them all for a starter.

    Bob AZ
    Ace, May 10, 2006
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.