Transmission Fluid Stick Readingn - 2000 Concorde LXi

Discussion in 'Concorde' started by John Gregory, Dec 6, 2004.

  1. John Gregory

    John Gregory Guest

    The dipstick showed the fluid level (hot) was a tad below the top two holes.
    Can someone tell me the fluid capacity it takes between these two; a cup,
    pint, quart? I don't want to overfill and I don't want add too little at a
    time.
     
    John Gregory, Dec 6, 2004
    #1
  2. John Gregory

    Bill Putney Guest

    Take the time to find out, and report the answer back to us. 8^)

    1 tad = ?

    Bill Putney
    (To reply by e-mail, replace the last letter of the alphabet in my
    adddress with the letter 'x')
     
    Bill Putney, Dec 6, 2004
    #2
  3. John Gregory

    John Gregory Guest

    One pint... prox.

     
    John Gregory, Dec 6, 2004
    #3
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Removal of Broken Dip Stick '96 Concorde?

  2. 2000 Concorde LXi Interference Engines

  3. Service Manual - 2000 Concorde LXi

  4. 2000 Concorde LXi Driver's Door Window

  5. Chrome Wheels on 2000 Concorde LXi

  6. 2000 Concorde LXi Tranmission

  7. 2000 Concorde LXi Achille's Heel?

  8. 2000 Concorde Lxi Evaporator Failure Rate?

Loading...