tilt steering 1988 Dodge dynasty?

Keef0420

Usenet Archive
Joined
Oct 10, 2003
Messages
2
Reaction score
0
Any advice or help would be GREATLY appreciated

The tilt steering assembly has come unbolted from the steering column. We have taken the wheel/lock plate/ turn signal/ ignittion out. We are down to where the assembly meets the steering column and can see 2 of the bolts. In order to get to the other bolts we need to take the tilt steering assembly appart.

The repair book I have just shows how to get the assembly and column out. 1988 FWD engine chassis and body service manual by chrysler has the info but I can't get it. Maybe someone has the CD-ROM or maybe can describe the process.

My car is in peices and we are at a stand still. I really need help and can't afford a mechanic.

215-704-0121
 
The tilt mechanism is usually non serviceable, the column as a whole is bolted to the underside of the cowl/dash usually 4 studs have nuts on them.
 
Back
Top