T&C Tail Lite lens, R&R ?

Discussion in 'General Motoring' started by ng_reader, Dec 29, 2006.

  1. ng_reader

    ng_reader Guest

    Maybe I didn't see it, but how do I remove my tail light lens on my '01 T&C
    Mini-Van?

    Didn't notice screws on the outside, nor anything on the inside leading to
    access.

    I have to replace some burned out bulbs, maybe when I pick them up I will
    find out....
     
    ng_reader, Dec 29, 2006
    #1
  2. ng_reader

    damnnickname Guest

    you didnt see it!!! open the liftgate, on the inside of the door opening is
    either 2 phillips screws or 2 plastic retainers that just pop out. remove
    and pull the lamp assembly out.

    Glenn Beasley
    Chrysler Tech
     
    damnnickname, Dec 29, 2006
    #2
  3. ng_reader

    philthy Guest

    open the liftgate and look on the sides u will see the fasnters ffor the rear
    tailites
     
    philthy, Dec 30, 2006
    #3
  4. ng_reader

    ng_reader Guest

    thanks both Chrysler good guys.

    Not a problem, after I looked again. Rubber stoppers, at first glance
    thought they were bumpers for the lift gate. Process of elimination would
    have led me to conclude otherwise.

    Clever bit of plastic, that. I did have to use a tool to get it started, but
    they removed and replaced (r & r) smartly and easily.
     
    ng_reader, Jan 8, 2007
    #4
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.