Sebring MTC problem

Discussion in 'Sebring' started by Guest, Mar 23, 2006.

  1. Guest

    Guest Guest

    Suddenly my wife's '91 Sebring has a problem with the Manual Temperature
    Control.
    -Only the high speed blower setting works.
    -The vent selection doesn't work.

    All fuses are OK.
    Nothing else electrical seems in trouble.
    My next step seems to pull that part of the panel off.

    Ideas welcome.
     
    Guest, Mar 23, 2006
    #1
  2. Guest

    maxpower Guest

    --
    Don't pull the panel off, replace the blower resistor, its located under the
    glove box mounted into the A/C Housing.

    Glenn Beasley
    Chrysler Tech
     
    maxpower, Mar 23, 2006
    #2
  3. Guest

    philthy Guest

    a 91 sebring????
     
    philthy, Mar 25, 2006
    #3
  4. Guest

    Guest Guest

    Sorry it's a 2001, the yrs are going too fast! <:)
    Hopefully Glenn's suggestion will do it. Certainly not where I'd have
    looked. I'm wondering if I kicked something there when a passenger; the
    toe room is a bit cramped for longer legged big foot passengers.
    If that's it wife will be extremely happy.
     
    Guest, Mar 27, 2006
    #4
  5. Guest

    maxpower Guest

    I knew what you meant, they didn't make a Sebring back then. replace the
    resistor as I stated before
     
    maxpower, Mar 27, 2006
    #5
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. 99 Sebring Convertible Speedometer Problem

  2. Advice please on diagnosing small electrical problem on Sebring

  3. Sebring JXi Convertible 97 alarm problem

  4. Problem with bal bearings on Sebring convertible 99

  5. 1999 Sebring LXi Door Problem

  6. Sebring JXI Convert Low Fuel Lamp Problem

  7. lighting problem on 98 sebring conv.

  8. sebring door handle on 2001 Sebring

Loading...