removing a 2004 Pacifica Radio

Discussion in 'Pacifica' started by Scott Koprowski, Aug 2, 2005.

  1. Could someone explain how to remove the radio in the Pacifica? I am looking
    into getting an auxilary input adapter and I need to connect it to the
    changer input on the back of the radio.


    Scott Koprowski, Aug 2, 2005
  2. Scott Koprowski

    maxpower Guest

    remove the ignition switch bezel and pop off the instrument panel, then
    remove radio screws
    maxpower, Aug 2, 2005
  3. Scott Koprowski

    tim bur Guest

    be very careful what you add the electronics on that vehicle are very
    tim bur, Aug 3, 2005
  4. It's just a matter of plugging a cable into the changer connection on the
    back of the radio. I already have done this with my 2001 PT Cruiser factory
    radio. It tricks the radio in thinking it has a changer installed and
    converts the signal to a rca stereo input. I use it for my mp3 player- it
    works great. You can also use it for a satellite radio input too. I highly
    recommend one for those with an ipod or any other mp3 player.

    Scott Koprowski, Aug 3, 2005
  5. Scott Koprowski

    tim bur Guest

    i was just saying be careful the electronics are very expensive on that car
    tim bur, Aug 5, 2005
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.