Recommendations? 2001 Concorde.

Discussion in 'Concorde' started by micky, Mar 14, 2005.

  1. micky

    micky Guest

    I need to replace the spark plugs and the brake pads on my 2001 Concorde.
    What brand should I get? Or should I stick with Mopar parts?



    I also need to replace the timing belt (92000 Mi)! How much should I expect
    to pay the dealer to do the job?



    Thanks.
     
    micky, Mar 14, 2005
    #1
  2. micky

    Bill Putney Guest

    Hawk HPS-type pads work well with these cars. Get the one made to the
    FMSI D591 spec. - the one they normally list for the LH cars has the
    wrong retainer on the outboard front pad - it will work, but the
    retainer doesn't fit qutie right. But the HPS is a good compound. I
    also just started using Performancd Friction "Z-Rated" pad - so far so good.

    Which engine do you have?

    Bill Putney
    (To reply by e-mail, replace the last letter of the alphabet in my
    adddress with the letter 'x')
     
    Bill Putney, Mar 14, 2005
    #2
  3. micky

    micky Guest

    <snip>

    3.2L. Thanks.
     
    micky, Mar 14, 2005
    #3
  4. micky

    Bill Putney Guest

    Just stick with the Champions - they are what came on it, and they are
    good plugs. Stay away from the Bosch +4 Plats - at least two unrelated
    incidences of electrodes breaking off on the 300M Enthusiasts forums -
    one with resulting engine damage. NGK's are supposed to also be good ,
    and were what DC switched over to in later years of LH cars.

    Bill Putney
    (To reply by e-mail, replace the last letter of the alphabet in my
    adddress with the letter 'x')
     
    Bill Putney, Mar 14, 2005
    #4
  5. micky

    micky Guest

    Thanks Bill.

     
    micky, Mar 15, 2005
    #5
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.