Programming Sequence For Autostart AS-1200 Remote Starter Key Fob

Discussion in 'General Motoring' started by Wayne, Oct 30, 2004.

  1. Wayne

    Wayne Guest

    Hi
    I have a 97 Neon that came with an Autostart AS-1200 Remote starter.
    The remote is not working and I have been unable to find the
    programming sequence to set up another remote for it. I bought the car
    used and have been able to find the manual for the starter online but
    no info for programming the remote. Any information would be greatly
    appreciated.

    Thanks

    Wayne
     
    Wayne, Oct 30, 2004
    #1
  2. Wayne

    y_wu Guest

    To program a new transmitter:
    1. Raise the hood
    2. Turn valet switch “off”.
    3. Turn ignition “on”.
    4. Turn valet switch “ON”. Parking lights
    SHOULD turn on for 5 seconds.
    5. Press channel 1 on transmitter within 5
    seconds of step 4. (lights will flash 5 times
    fast, and 2 times slow)
    6. Turn ignition off and close the hood.

    enjoy it

    vince
     
    y_wu, Nov 8, 2004
    #2
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Remote key fob - replacement

  2. Battery for remote key fob

  3. Programming a 96 New Yorker Fob

  4. ID Keyless Remote Fob Part No 04686482 AC

  5. Programming key for 2001 Neon

  6. Programming remote for 2002 Dodge Grand Caravan

  7. remote entry -key fob programming

Loading...