On a convertibie, how to remove the front rubber gasket?

Discussion in 'General Motoring' started by mm, Jul 12, 2009.

  1. mm

    mm Guest

    On a convertible, does anyone know how to remove the front rubber
    gasket, between the roof and the windshield. I have a '95 LeBaron,
    but I thihk all the LeBarons and Sebrings areound that time are

    It's firmly attached to a metal strip**, a U-channel that the
    instructions say has screws holding it in, 2 inches from each end,
    but when I took out a screw at one end, it didn't seem to loosen it
    at all. In fact it seemed to point in the wrong direction, back
    instead of up. I can't find the screw at the other end!

    **They call it the the top header feature strip.***

    Can anyone give me advice on any of this? Anything would be

    *** Google gives only one hit for those four words, and that page
    quotes the manual. Worth saving if you intend to do this, but all the
    steps have only one line of instruction, no real description, and no
    pictures. OTOH, the 94 shop manual includes no pictures for most of
    it. (Since they usually don't change the manual from year to year
    unless the facts change, I'll bet the Sebring manual is the same.)
    mm, Jul 12, 2009
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.