No bus code

Discussion in 'Sebring' started by Steph, Jul 21, 2020.

  1. Steph

    Steph

    Joined:
    Jul 21, 2020
    Messages:
    1
    Likes Received:
    0
    I have an 01 chrysler sebring. I spent 800 bucks yesterday replacing suspension and brakes. Today i went to start it and it turned over and started but immediately died 2x. Then it wouldnt turn over at all and a no bus code appeared. Tried to check the codes but its not giving any. After looking through forums i realize this has been an ongoing problem as my a/c stopped blowing but would start again if i smacked the ac knobs. My question is how am i supposed to figure out what im supposed to replace? A module or a pcm or a tcm i dont know where to start can anyone please point me in the right direction? I dont have much more money to theow at this car but i csnt afford to teplace it either. My bf already disconnected the battery and reconnected it and checked the fuses.
     
    Steph, Jul 21, 2020
    #1
    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.