M
Michael Austin
Does someone have a doc or a pointer to a doc with the voltage readouts
on the 6 pin connector for the rear wiper motor?
__
+----+ +---+
| |
| 1 2 |
| |
| 3 4 |
| |
| 5 6 |
| |
+-----------+
I attempted to replace the old motor with a used one and it did not work
either. This was a week or so ago... I have a few days with which to
return the used part... By removing the electronic board, I was able
to test the motor and it does work... Also if any knows of a place to
get the board cheap would be helpful as well. $50 for a used motor is a
bit steep... But then again, a lot cheaper than the $100 for a
refurbished one from your local AutoZone (or whatever...)
Thanks,
Michael.
on the 6 pin connector for the rear wiper motor?
__
+----+ +---+
| |
| 1 2 |
| |
| 3 4 |
| |
| 5 6 |
| |
+-----------+
I attempted to replace the old motor with a used one and it did not work
either. This was a week or so ago... I have a few days with which to
return the used part... By removing the electronic board, I was able
to test the motor and it does work... Also if any knows of a place to
get the board cheap would be helpful as well. $50 for a used motor is a
bit steep... But then again, a lot cheaper than the $100 for a
refurbished one from your local AutoZone (or whatever...)
Thanks,
Michael.