Ignition Lock Cylinder removal?

Discussion in 'General Motoring' started by jmcgill, May 3, 2006.

  1. jmcgill

    jmcgill Guest

    I need to remove the ignition lock cylinder on my 1988 Aries. Can
    anyone out there tell me what's involved with doing this? Is there
    some trick to it, or do I have to take the steering wheel off and
    remove all the innards?

    Thanks,

    Joe
     
    jmcgill, May 3, 2006
    #1
  2. jmcgill

    Joe Pfeiffer Guest

    Remove steering wheel, dig from there. Have an FSM handy, and it's
    not a bad idea to take photos as you go.
     
    Joe Pfeiffer, May 3, 2006
    #2
  3. jmcgill

    aarcuda69062 Guest

    Steering wheel has to come off, lock plate has to come off, turn
    signal switch has to come out a ways...
     
    aarcuda69062, May 3, 2006
    #3
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. loose Steering - removing ignition swich lock

  2. 99 T&C ignition lock cylinder

  3. Minivan Ignition oOck Cylinder

  4. 8 cylinder to 4 cylinder in new DC V8's

  5. 93 Voyager Ignition Cylinder

  6. 1994 Dodge Grand Caravan Ignition Cylinder

  7. Ignition lock cylinder release spring location

  8. key lock cylinder ?

Loading...