how to remove the air filter housing

Discussion in 'General Motoring' started by Mike Muzaini, Mar 21, 2005.

  1. Mike Muzaini

    Mike Muzaini Guest

    Hi all,
    I need to change the battery on a 98b Intrepid, I have removed the
    negative post connection, the air filter, but how do I take out the
    air filter housing, Hopefully someone will guid me before the sun goes

    1st message, and haven't browsed the group messages yet. but I'll do
    in near future
    Mike Muzaini, Mar 21, 2005
  2. Mike Muzaini

    maxpower Guest

    The battery comes out the side access panel at the right fron wheel well.

    1.. Turn the steering wheel all the way to the right.
    2.. Verify that the ignition switch and all accessories are OFF.
    3.. Disconnect and isolate the negative battery cable remote terminal from
    the remote battery post Negative Battery Cable Remote Terminal
    4.. Remove air cleaner housing. Remove the fastener at the air cleaner to
    body, air intake snorkel and lift housing from its grommet
    5.. Remove battery splash shield.
    6.. Remove two short bolts to battery hold down.
    7.. Slide battery rearward to disconnect the negative and positive battery
    terminals from battery.
    8.. Slide battery toward rear of vehicle and lift out through wheel well
    9.. Remove battery from vehicle.

    Glenn Beasley
    Chrysler Tech
    maxpower, Mar 21, 2005
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.