Discussion in 'General Motoring' started by Dave C via, Jun 17, 2005.

  1. hllo all, I recently had my a/c condenser replaced, as well as some front end
    woek done on my 200
    chrysler neon. I t works fine, but for some reason, sometimes when I put my
    headlights on, my wipers come on??? never seen this before, and the mechanics
    up here in the great north are scratching their heads. Can someone please
    reply and save me some diagnostic time. I'm thinking some king of relay
    problem?? PLEASE HELP
    Dave C via, Jun 17, 2005
  2. Dave C via

    tim bur Guest

    cut wires going to the pdc
    tim bur, Jun 17, 2005
  3. I probably should know this, but what is a pdc? thanks for your speedy reply!
    Dave C via, Jun 17, 2005
  4. Dave C via

    tim bur Guest

    power distribution center (under hood fuse box)

    tim bur, Jun 18, 2005
  5. Tim, thanks again for all your help, have you had this problem before? Where
    should I begin to look for these wires?

    Dave C via, Jun 18, 2005
  6. Dave C via

    maxpower Guest

    a loose ground G101 & G102 (left headlamp), or ground bolt is broken or
    the incorrect bolt (aluminum) was used and is causing high resistance. Also
    ground G103 should be checked (located in the right headlight area
    especially since you say you had work done in that area
    some body shops use aluminum bolts, in turn it will cause a High Resistance
    issue on these grounds

    Glenn Beasley
    Chrysler Tech
    maxpower, Jun 18, 2005
  7. Thanks man, I just checked it, and it was infact a non factory type bolt, in
    a different hole. I changed it for one that looked better and put it in a
    hole that matched the other side. we'll see what happens!

    Dave C via, Jun 18, 2005
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.