Crank and Camshaft Sensor Replacement?

Discussion in 'General Motoring' started by Guess Who I Am, Nov 28, 2004.

  1. Hello:
    How offen should you replace the crank and or the camshaft sensors?
    i had mind replaced at around 60k mi. when it went out and would not start.
    so i'm wondering should i replace them again at 106k and not take the chance on
    one or both of them going out again? 97' GV 3.3

    Thank You
    Guess Who I Am, Nov 28, 2004
  2. Guess Who I Am

    Ritz Guest

    Recommended service interval for those parts is: replace when they
    break. It's not really necessary or cost effective to pre-emptively
    change them.

    Ritz, Nov 28, 2004
  3. When either component fails. They are not maintenance items.
    Daniel J. Stern, Nov 28, 2004
  4. Guess Who I Am

    Mopar Man Guest


    For unanticipated breakdowns own a tow policy to get you home. Then you can call
    Enterprise and they'll deliver a rental car to you.

    Regarding your trepidation about emminent failing crank and cam sensors, go
    ahead, BE AFRAID.....
    Now take a deep breath of air, IN, OUT, IN, OUT. Feel better now?

    See you at the party at Terry's

    Mopar Man
    Mopar Man, Dec 4, 2004
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.