Code....PO138 02 (Circuit High...........

Discussion in 'General Motoring' started by Denny B, Feb 22, 2010.

  1. Denny B

    Denny B Guest

    My airbag icon light on all the time.
    Took a code reading, it reads exactly as below.

    PO138
    02 Circuit High
    Voltage ( Bank 1,
    Sensor 2 )

    Someone know what this code is?

    Thanks in advance
    Denny B
     
    Denny B, Feb 22, 2010
    #1
  2. Denny B

    Bill Putney Guest

    You don't say what vehicle :( but Bank 1 is the one where cylinder 1 is.
    For an non-transverse engine, it's the bank on the passenger side of
    the vehicle. Sensor 2 would be the one downstream in the exhaust
    (towards the rear for a non-transverse engine.

    It's telling you that that O2 sensor has high voltage - probably bad
    sensor, or might be problem in the cable to the sensor.
     
    Bill Putney, Feb 22, 2010
    #2
  3. Denny B

    Denny B Guest

    Bill, I realized after posting I did not clarify vehicle,
    it is a 2006 Dodge Caravan, 6cyl, 3.3L

    Denny B
     
    Denny B, Feb 23, 2010
    #3
  4. Denny B

    MoPar Man Guest

    What ever happened to Glenn Beasley (Maxpower) ??

    I don't think he's posted to usenet since late October / 2008...
     
    MoPar Man, Feb 23, 2010
    #4
  5. Denny B

    MoPar Man Guest

    And last appearance I can find anywhere on the web was June 2009 on
    chryslerforum.com.
     
    MoPar Man, Feb 23, 2010
    #5
  6. Denny B

    Steve N. Guest

    Steve N., Feb 23, 2010
    #6
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.