Clock in 300M not working

Discussion in 'Chrysler 300' started by MauriceV, Feb 22, 2006.

  1. MauriceV

    MauriceV Guest

    Hi

    For some reason the clock in my 1999 300M stopped working. I checked
    all the fuses, but there doesn't seem to be one for the clock. Does
    anybody know how I could remove the part of the dash that contains the
    clock so I might check for a loose wire?

    Any help would be appreciated.
     
    MauriceV, Feb 22, 2006
    #1
  2. MauriceV

    Bill Putney Guest

    Here's a short, succint thread on the 300M Enthusiasts Club forums,
    including links to two How to's with photos:
    http://300mclub.org/forums/viewtopic.php?t=10707

    Bill Putney
    (To reply by e-mail, replace the last letter of the alphabet in my
    address with the letter 'x')
     
    Bill Putney, Feb 22, 2006
    #2
  3. MauriceV

    MauriceV Guest


    Thank you very much!
     
    MauriceV, Feb 23, 2006
    #3
  4. MauriceV

    Bill Putney Guest

    You're welcome!

    Bill Putney
    (To reply by e-mail, replace the last letter of the alphabet in my
    address with the letter 'x')
     
    Bill Putney, Feb 23, 2006
    #4
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.