Cirrus Blower Resistor

Discussion in 'Cirrus' started by KirkM, Jan 27, 2009.

  1. KirkM

    KirkM Guest

    My 2000 Chrysler Cirrus has claimed it's 2nd blower resistor is just
    over two months.

    Does this mean that the blower is drawing too much current, and should
    be replaced?

    Thanks.

    KM
     
    KirkM, Jan 27, 2009
    #1
  2. Is the blower blowing the fuse?

    You can put an ammeter in at the fuse, and see what the current draw is.

    I'd look for the airflow first. These resistors must be cooled or they will
    overheat and die, and if the airflow is restricted they will do that.

    Ted
     
    Ted Mittelstaedt, Jan 27, 2009
    #2
  3. KirkM

    Bill Putney Guest

    Yes.
     
    Bill Putney, Jan 27, 2009
    #3
  4. KirkM

    KirkM Guest

    How much current is reasonable for a blower motor? I am guessing that
    it draws more current at startup.

    I am going to remove the blower and see if there is any visual
    spinning resistance. NAPA gets $75 for a new one. An OEM part is more
    than double that.

    Thanks for all the help.

    -KM
     
    KirkM, Jan 29, 2009
    #4
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.