Chrysler voyager 2000

Hello from France

i have a 2000 voyager Fuel and lpg.
since fwe days both light are on CHECK ENGINE and CHECK
GAUGES.... !!!
i checked everything OK
the voltage goes down the temperature gauge is not stable also...

First question : can the voltage loss create this kind ouf trouble ??

other request if someone had the PDF of the wiring diagram this
will great......

 

Hello Glenn from USA

If the check engine lite is on there is a fault code set in the PCM's memory
which could point you in the direction of why the check gauge lite is on.
Have a scanner connected to find out what fault code is set. A wire diagram
wont really help you at this point until you can determine what gauge is at
fault. Assuming that the engine is not overheating and pegging the temp
gauge I would pay attention to your oil pressure gauge......if it drops off
while the engine is running the check gauge lite will turn on.
Just a thought!!

Glenn Beasley
Chrysler Tech

 

i tried out this morning with the on Off sequenc and he gave a lot of
different codes 14.16.22.27 etc.. maybe a question if the power is
too down will the system turn nuts ???
*

 

thank's Glenn
more infos :

on left hand side the red text is lite on CHECK GAUGE is on and
CHECK ENGINE is on also;

on the right hand side i have a battery gauge from 8V to 18 v
normally this one is nearly in the middle if evrything is right...

at this moment i think the battery will not more be charged or the
regulator seems to have a failure.. The tension goes continoulsy
down :::::
for this reason i believe all systems truns nuts because the tension
is not right ..... possible or not ??

 

You need a scan tool to check for fault codes!! What do you mean if the
power is down? Are you having battery problem and thats why the check gauge
lite is turning on??? Because it wants you to look at the battery
lite/gauge?

Glenn

 

One more time, you need to have a scanner connected to see what the fault
is, it is probably going to be something like "generator field not switching
properly" then while the scanner is connected...if its a charging problem
the system can be monitored.

Lost me here!!!