Changing plugs 3 & 5 on 3.8L 96 T&C

Discussion in 'General Motoring' started by Frank, Jul 21, 2003.

  1. Frank

    Frank Guest

    Has anyone changed the spark plugs on a 3.8L Town & Country ('96)? The
    procedure described in the Haynes manual to access plugs 3 & 5 seems to
    require additional joints in the human arm that I do not possess. And even
    if you could get your hands back there, I don't know what kind of wrench
    you're supposed to use because it looks like there is no clearance.

    It seems to me the only way to get at these buggers is to remove the intake
    plenum (which would make plug 1 easier to get at as well). Any hints or
    tricks?

    thanks.
     
    Frank, Jul 21, 2003
    #1
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.