T
TOM KAN PA
After awhile, the paint tends to get thick. What can be used to thin it out?
I've tried laquer thinner with no success.
BTW, I have a Harbor Freight inexpensive air chisel. I put Velcro in the groove
of a chisel and the mating piece on the side of the touch up paint bottle.
Press them together, WRAP THE BOTTLE/CHISEL WITH A TOWEL AND HOLD IT. Turn on
the air chisel. I usually let it run until the compressor turns on. Actually,
the paint is probably shaken more in ten seconds this way than a half hour by
hand.
I've tried laquer thinner with no success.
BTW, I have a Harbor Freight inexpensive air chisel. I put Velcro in the groove
of a chisel and the mating piece on the side of the touch up paint bottle.
Press them together, WRAP THE BOTTLE/CHISEL WITH A TOWEL AND HOLD IT. Turn on
the air chisel. I usually let it run until the compressor turns on. Actually,
the paint is probably shaken more in ten seconds this way than a half hour by
hand.