Another 2001 PT bumper facia question (white marks)

Discussion in 'PT Cruiser' started by Pete E. Kruzer, Jul 7, 2010.

  1. Pete E. Kruzer

    Pete E. Kruzer Guest

    I was reading an article on the reason for the white marks on 01 - 03
    Cruiser white marks. It said that it was caused by masking the bumpers
    before the car went through the paint booth. The heat pulled the resin
    from the tape causing the white marks to show up later.
    If this is the reason, then why would the article state, "Since the
    white marks will come back even on parts from the MOPAR service
    center, the only solution is to paint the fascia (as some have already
    done)."

    If the marks were caused from taping, then why would facias that have
    never been on a car having no reason to masked?

    There was no way I could ask the author this question, I thought there
    might be someone in this group who could.
     
    Pete E. Kruzer, Jul 7, 2010
    #1
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. ! My A/C blows white steam/vapor, HELP !

  2. another electronic ignition question

  3. another a/c question

  4. Yet another 4-speed trans question

  5. Another trnny interchange question, 93 AWD to 96 FWD Caravan

  6. 2001 PT power steering repair - ANOTHER CHRYSLER RIP OFF!

  7. Tape marks on PT bumper remedied, I hope.

  8. 04 GC question from a friend in another state

Loading...