'99 T&C Driver's side electric seat...

Stopped working. Anyone know what this could be? Does each seat have its
own fuse?

Any help advice/appreciated.

TIA
Brigitte

 

Did all functions of the seat stop working? I ask this because my '96 T&C has
two switches - one for the seat back and one for the seat bottom. If nothing
works it may be your that your main connection at the back of the seat
(underside) could have disconnected. If the passenger seat still operates it is
not the fuse as both seats use the same 40amp fuse (#26 in power distribution
center) . If it turns out to be the motors email me privately as I may have a
solution for you.

RP

 

Hi RP,
Thanks for your response. Both functions on the driver's seat have stopped
working. I'll take a look under the seat to see if I can see where a
connection is disconnected. Can you give me more specific information on
what I'm going to be looking for?

TIA
Brigitte

 

At the rear of the seat, in the middle underneath, you will find the connector
(should be attached to the seat bottom) where the plug at the end of the wiring
coming out of the carpet connects. They lock together to prevent them from
separating but that doesn't mean they can't. If they are securely connected
something else is responsible for the loss of power as I think it highly
unlikely that both functions would stop working at the same time. I am assuming
the functions on the passenger seat still work. By '99 the wiring could have
changed so that each seat has its own fuse so it would be best to check your
owners manual. I don't know what else to tell you. Good luck!

RP

 

Thanks RP. I'll check it out today. Hopefully it's only become
disconnected. And yes, the passenger seat still works fine.

Brigitte

 

Brigitte - Please keep me/us posted as to what you find out.

Randy