98 Intrepid, wiper arm removal?

How to??

thanks

 

If it is like my 95 Eagle....

1. Lift up on the arm
2. Locate a small tab at the base of the arm (where is connects to the
transmission assembly). Using a screwdriver, pull out on that tab.
Shouldn't require that much force. Let arm back down and it should rest
on that tab.
3. Pull arm off.


If yours isn't like this, dis-regaurd this information.


Hope this helps!

 

Straight from the FSM: You have to remove the plastic/rubber cap at the
center of rotation (pry off carefull with something that won't scratch
the metal). It conceals a nut that you of course loosen, and then
wiggle the arm off of the shaft.

Bill Putney
(to reply by e-mail, replace the last letter of the alphabet in my
address with "x")

 

It is possble to change blade rubber without removing arm.