97 voyager pcm question

Discussion in 'Voyager' started by newrebel, Sep 26, 2007.

  1. newrebel

    newrebel Guest

    any of you guys know if the pcm on a 97 my 3.3 voyager/caravan has some
    form of impact sensor installed. customer has been trying to locate cause of
    intermittent cutting out and has noticed that if he gives the PCM a sharp
    tap then the engine cuts .
     
    newrebel, Sep 26, 2007
    #1
  2. newrebel

    Bill Putney Guest

    I don't know the answer to your question, but it is likely a defective
    pc board - broken trace or surface mount component popped loose making
    intermittent contact when jiggled.

    Bill Putney
    (To reply by e-mail, replace the last letter of the alphabet in my
    address with the letter 'x')
     
    Bill Putney, Sep 26, 2007
    #2
  3. newrebel

    Mike Guest

    Nope, no impact sensor. It sounds like he has a bad PCM.
     
    Mike, Sep 26, 2007
    #3
  4. newrebel

    maxpower Guest

    The heat sink in the PCM is bad making the engine cut off, replacing the PCM
    is the only way to correct the problem.


    Glenn Beasley
    Chrysler Tech
     
    maxpower, Sep 27, 2007
    #4
  5. newrebel

    kmath50 Guest

    If one buys a PCM from the dealer, are they new or reconditioned? I
    remember you mentioning that sometimes these units get cleaned up and
    resold, without the problems being resolved.

    -KM
     
    kmath50, Sep 28, 2007
    #5
  6. newrebel

    maxpower Guest

    You cannot get a new PCM for that vehicle. Chrysler Does NOT reman these
    units, It is a aftermarket company that that does this and puts them back
    out on the market,I will say that I have not had a problem in awhile with
    installing one nor have I heard of any problems from anyone installing them.
    It is possible that the company that has been doing the repairs have
    tightened up and got their act together or maybe Chrysler is using another
    company to get these units from. You would be surprised of how many "reman"
    products get cleaned up, painted and sold as a good part get put back out on
    the market. Alternators, starters, a/c compressors....There are several
    parts supplies out there that I would never purchase such an item from

    Glenn
     
    maxpower, Sep 28, 2007
    #6
  7. newrebel

    Bill Putney Guest

    Half shafts...

    Bill Putney
    (To reply by e-mail, replace the last letter of the alphabet in my
    address with the letter 'x')
     
    Bill Putney, Sep 29, 2007
    #7
  8. newrebel

    philthy Guest

    standard blue streak hasz a good line of pcms
     
    philthy, Sep 30, 2007
    #8
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.