'96 Concorde Makes a thump after right turn

Discussion in 'Concorde' started by njoracle, Jul 1, 2008.

  1. njoracle

    njoracle Guest

    When I make a right turn there is a "thump" or "crack" sound ONLY after
    stepping on the brake. All of the body mount bushings were replaced a
    couple of years ago so I don't think it is that. Any ideas on where to
    look for this "noise"?

    Concorde '96 LX 150k miles 3.3 engine
     
    njoracle, Jul 1, 2008
    #1
  2. njoracle

    maxpower Guest

    Lower control arm bushings moving on arm?

    Glenn Beasley
    Chrysler Tech
     
    maxpower, Jul 2, 2008
    #2
  3. njoracle

    njoracle Guest

    Thanks for the tip. I'll take a look at that.
     
    njoracle, Jul 2, 2008
    #3
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. '95 LHS Turn Signal/Hazards dead after tranny rebuild

  2. 2000 Grand Voyager SE 3.3L will not start - Only makes various clickingsounds

  3. OT - 1999 300M screaching after turn off engine

  4. Thump in 95 Voyager LE when turning

  5. Right Rear Strut tower 98 Concorde

  6. Right turn signal flashing faster than left

  7. 2001 T&C, creak/thump when turning steering wheel

  8. Why does PT foglight come on with right turn signal?

Loading...