94 Voyager update 3

Discussion in 'Voyager' started by The Gaylord 2006, Oct 7, 2006.

  1. The Gaylord 2006

    The Gaylord 2006 Guest

    Ok, so this is what happened.

    I was driving hope the speedo stuck and the van came to a stop, would not
    restart.

    After checking and double checking, I found a fuse had blown, replaced the
    fuse and everything worked, I was happy, well.... it worked for about 20
    miles then the same thing happened, car stopped, would not start...So I
    replaced the fuse and managed to get it home.

    What would be causing the fuse to blow, a week before all this started i had
    the starter motor replaced, could that be causing it?

    Thanks
     
    The Gaylord 2006, Oct 7, 2006
    #1
  2. The Gaylord 2006

    maxpower Guest

    ummmm if you replaced the fuse twice, why not post what fuse is blowing?

    Glenn Beasley
    Chrysler Tech
     
    maxpower, Oct 7, 2006
    #2
  3. The Gaylord 2006

    philthy Guest

    that would be the first place to look for a shorting wire if you did not know
    the circuits that the fuse powered does the fuse only blow when it's moving ??
    or just when it's running?? might be the harness is getting pulled onto a sharp
    edge
    might not
     
    philthy, Oct 7, 2006
    #3
  4. The Gaylord 2006

    The Gaylord 2006 Guest

    The fuse from what Im told is the one for the ignition and cluster?
     
    The Gaylord 2006, Oct 7, 2006
    #4
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. '03 Cherokee 2 wheel drive differential-update

  2. UPDATE (Fixed): 1994 NY 3.5L Harsh downshift 2-1 when slowing to a stop.

  3. cirrus update

  4. Update: 02 sensor for 3.0V6

  5. Update: 1993 Caravan Problem

  6. Update: Acclaim stalling after a time

  7. update on 94 voyager

Loading...