93 Plymouth Acclaim 2.5

Discussion in 'Other Models' started by BarbaricMars, Sep 3, 2020.

  1. BarbaricMars

    BarbaricMars

    Joined:
    Sep 3, 2020
    Messages:
    1
    Likes Received:
    0
    Hello everyone!

    This summer I decided to help my brother replace his headgasket after a shop tore his engine apart and wanted $3K to fix it.

    We are almost completely finished with the project but I cannot for the life of me figure out where the hard tubing that goes that attaches from underside of the thermostat housing.

    We have the manifolds installed, exhaust downpipe installed, head torqued down per spec. But I didn't take the engine apart and I am at a loss of where the tubing connects on the other end.

    If anyone can help me out we'd really appreciate it!!
     

    Attached Files:

    BarbaricMars, Sep 3, 2020
    #1
    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.