'92 Plymouth Acclaim electrical issues...

Discussion in 'General Motoring' started by KillerBear, Oct 25, 2004.

  1. KillerBear

    KillerBear Guest

    There is something very wrong with the electrical. The tack needle
    sits at 6000rpm and does not move. When it's in that position, the
    radio, and interior light do not work. At other times the tack gets
    burried at 7000+, when it is in that position everything works fine.
    Then sometimes magically it goes back to normal and everything works
    fine again. The tack seems to take these positions at random times.
    Also if everything IS working fine and I press the Rear Defroster
    button, right away the tack sits at its 6000 rpm position and makes
    everything stop working.
    Ever seen this? Have any suggestions? I would greatly appreciate it.
     
    KillerBear, Oct 25, 2004
    #1
  2. KillerBear

    Daniel J. Stern Guest

    Your instrument cluster has lost its ground.
     
    Daniel J. Stern, Oct 25, 2004
    #2
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. 1994 Plymouth Acclaim oil missing?

  2. 1993 plymouth acclaim wheel bearing replacement

  3. Plymouth Acclaim 92'

  4. 1991 Plymouth Acclaim 2.5 NON turbo. Cooling system ?'s

  5. 1994 PLYMOUTH ACCLAIM

  6. Plymouth Acclaim 1992

  7. Idle/smoke/fuel issues with a 92 plymouth reliant

  8. 1997 LHS Alarm and Electrical issues...

Loading...