91 LeBaron almost failed idle hydrocarbons

Discussion in 'LeBaron' started by billccm, Oct 7, 2007.

  1. billccm

    billccm Guest

    Hello All:

    I just got back from getting my LeBaron emissions tested (3.0V6), and
    it almost failed idle hydrocarbon. Here are the results:
    Hydrocarbon Loaded: 82, alllowable standard 220
    Hydrocarbon Idle: 217, allowable standard 220

    I almost failed IDLE Hydrocarbon.

    I went back and looked at least year's test, and the Idle Hydrocarbon
    was 145. So, sonething has changed in one year (and 8K miles).

    Any comments, or advice is appreciated. Thanks, and take care, Bill
     
    billccm, Oct 7, 2007
    #1
  2. billccm

    Road Runner Guest

    Most common reasons are a poor oxygen sensor, catalytic converter or just
    plain dirty engine oil.
     
    Road Runner, Oct 7, 2007
    #2
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. High hydrocarbons at idle and Stalling just as car warms.

  2. 2000 Concorde Door Solenoids all failed.

  3. '99 T&C Air Conditioner Reset Failed --- Help.

  4. FS: 1988 Lancer Shelby One Owner Almost Perfect

  5. CLS Review UK - "Almost flawless"

  6. 300M Almost stalling

  7. LeBaron Idle hesitation

  8. 99 300M Very Rough Idle (almost dying) on Startup

Loading...