2001 Sebring 4 dr

Discussion in 'Sebring' started by Even Stephen, Apr 8, 2008.

  1. Even Stephen

    Even Stephen Guest

    The inside front door panels on my son's Sebring seem to be wanting to fall
    off when the doors are pulled shut. They are loose but still stay on. Is
    there a way I can re-attach them myself? I didn't see any inside mounting
    screws that allow them to be removed. Suggestions? Thanks!
     
    Even Stephen, Apr 8, 2008
    #1
  2. Even Stephen

    kmath50 Guest

    Usually, they are held on by a few screws and some spring clips. I
    would suggest checking around the arm rest "grip" that is used for
    closing the door. There will most likely be a round or square "cap."
    The screw is under this. The screw may just be loose, or is stripped.

    -KM
     
    kmath50, Apr 8, 2008
    #2
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Sebring 2001 sedan / blower resistor.

  2. 2001 Intrepid vs 2001 Sebring

  3. 2001 Sebring Sedan brake lights don't work

  4. 2001 Sebring Sedan 2.7 Engine/Tranny Whistle ??

  5. 2001 Sebring Temp gauge fluctuations

  6. 1999 Intrepid v.s. 2001 Sebring

  7. sebring door handle on 2001 Sebring

Loading...