Discussion in 'Concorde' started by stuff, Aug 10, 2004.

  1. stuff

    stuff Guest

    I have a 2000 Chrysler Concord with 65,345 miles on it and after a battery
    replacement, the speedometer now shows 300,016 miles on it and stays at
    this miles as I drive it. My local mechanic changed out the inst cluster,
    the engine control and transmission control modules from a wrecked car and
    the speedometer stays the same. The car runs good, as it did before the
    battery change, just the milage doesn't change. help? What do I need to
    replace to make it work again and how can I put it back to the origional
    stuff, Aug 10, 2004
  2. stuff

    mic canic Guest

    have him check for fault codes in the bcm it also contains the milage and is
    more than likely the failed part
    mic canic, Aug 11, 2004
  3. stuff

    stuff Guest

    Where is the body control module located? The mechanic that is working on
    it doesn't have a code reader and will have to change out the module. I
    still don't know how to get the origional miles back on the car. Thanks
    for your help
    stuff, Aug 11, 2004
  4. stuff

    Bill Guest

    It is attached to the fuse block (on the back side) at the left end of the
    instrument panel.

    Bill, Aug 14, 2004
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.