1998 Voyager MPG meter connection help needed.

Discussion in 'Voyager' started by claton.cadmus, Feb 23, 2009.

  1. I'm helping a friend install a MPGuino Miles per gallon meter. We
    need to tap the VSS speedometer pulse wire and an injector wire. I
    think the best place to do that would be near the ECU connector.
    Could someone please tell us what wires to tap or point us to were we
    might find the ECU pinout diagram? BTW it's a 3.3L automatic.

    Thanks Clay
    claton.cadmus, Feb 23, 2009
  2. claton.cadmus

    Bill Putney Guest

    If someone doesn't provide the info., you could get a 1 year
    subscription to www.alldata.com, but it will cost you $25 or $30 (used
    to be $25, but I think they increased it recently). With the
    subscription, you would get on-line access to all schematics specific to
    your vehicle right out of the FSM.

    Also, used to be that dealers would let you look at their FSM's in their
    facility, but few may still have the '98 laying around.
    Bill Putney, Feb 23, 2009
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.