1997 Plymouth Van CD Player Error

Discussion in 'General Motoring' started by W. eWatson, Aug 5, 2009.

  1. W. eWatson

    W. eWatson Guest

    When I try to play a CD, it goes nowhere and Err appear on the LCD. I
    have a premium sound system. It looks like there's a black plastic frame
    around the radio, tape and CD player that might be pulled off. Any
    suggestions on how to repair the faulty player?
     
    W. eWatson, Aug 5, 2009
    #1
  2. W. eWatson

    W. eWatson Guest

    Blowing some air into it solved the problem.
     
    W. eWatson, Aug 5, 2009
    #2
  3. W. eWatson

    caradiodoc Guest

    I've worked on thousands of these radios over the years and have never
    run into a defective cd laser assembly on a Mitsubishi-built Chrysler
    cd / cassette unit. Only found four bad lasers on one model of the
    Alpine-built cd-only radios. Compare that to a 100 percent failure
    rate on 1990s GM cd players.

    By blowing air into your player, (not sure what made you think of
    that), you blew some dust off the laser assembly. I've solved most cd
    "Err" problems by cleaning the lasers with a Q-tip, but I don't
    recommend do-it-yourselfers doing that due to the potential of doing
    damage. Happy you got yours going, but if problems continue, try
    running a cleaning disc through it.

    caradiodoc
     
    caradiodoc, Aug 6, 2009
    #3
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.