1996 Town & Country Blinkers

Discussion in 'General Motoring' started by BruceMan, Aug 11, 2005.

  1. BruceMan

    BruceMan Guest

    My blinkers stopped working about a week ago. Didn't work for a few
    days then started working again. Once the vas has been started, if the
    blinkers work, they will continue to work until the van is shut off.
    Then when started again, they usually don't work. The 4-way flashers
    work without a problem. I was told that the 4-ways and the blinkers are
    housed in the same module. Anyone have an idea of what to look at?
    BruceMan, Aug 11, 2005
  2. BruceMan

    BruceMan Guest

    My wife just came back from driving 100 miles and said the blinkers
    started working the last couple miles after stopping to drop off a
    friend (the engine remained on).
    BruceMan, Aug 11, 2005
  3. I think the multifunction switch is probably your problem, they were known
    for trouble.

    Ted Mittelstaedt, Aug 11, 2005
  4. BruceMan

    M. Blomquist Guest

    Sounds familar. I had my multifunction switch replaced due to ghosting
    wipers a long time ago. My left turn signal quit working recently and I
    found the blinker module half out of the fuse block, sort of hanging there.
    Pushed it back in. Had one more instance of no left turn signal, like maybe
    the thing missed that particular malfunction. I checked the fuse block and
    all was tight. No more problems since.
    M. Blomquist, Aug 15, 2005
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.