1995 cirrus limp mode

Discussion in 'Cirrus' started by ngoc_hien25, Nov 30, 2006.

  1. ngoc_hien25

    ngoc_hien25 Guest

    I had the old 1995 chrysler cirrus with the limp mode problem, here is
    the problem with the car and what I had done to it: last month the
    instrument panel, door indicator was on all the time it would
    ding(sound of the door) when I accelerate and when the car get hot it
    ding more offen and then it go into limp mode I had replaced the TCM
    and the body module. The door indicator is on when the car is running,
    no more ding(sound) and the car run smoothly for a week, so I invested
    about $1000 in the car because it old... now it get into limp mode
    again and at first I can just restart the engine and it would run fine
    and now when it get into limp mode restart engine won't work any
    more... I know for sure there is nothing wrong with the transmission
    itself. I think it is electrical issue but I don't know where is the
    problem .....so.....Any one out there has any ideas what wrong with the
    car????? I am college student so I can't effort to take it to the
    dealer everydays any tips would help...........................thank
    you very much for taking your times to read my problem and helping me
    solve it .... once again thank!!!
    ngoc_hien25, Nov 30, 2006
  2. Put the old TCM back in and see if it works.

    If not then your going to have to get it scanned. It could be a sensor.

    Ted Mittelstaedt, Dec 1, 2006
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.