1994 Sundance Fuel Pump Lock Ring

Discussion in 'General Motoring' started by jorussii, Jul 22, 2006.

  1. jorussii

    jorussii Guest

    Trying to replace a Fuel Pump on a 94 Sundance 2.5L. Chilton shows you
    must hit the lockring counter clockwise. The ring around the fuel pump
    looks like it's tap welded, is that not the part I'm suppose to turn?

    Whatever happen to the good ol chilton bible books?
     
    jorussii, Jul 22, 2006
    #1
  2. jorussii

    maxpower Guest

    Me personally, I get alot of use out of those books. In the summer they keep
    my doors open when it is breezy and when winter rolls around they make it
    easy to start my fire in the stove. Just use a few pieces of paper at a time
    works great.

    If im not mistaken you have to hit the locking ring counter clockwise to
    remove it. It should be cut and dry how to get it off if you take a look at
    it. There is no weld. I would also suggest you use a brass punch or
    something similar to prevent sparking.

    Glenn Beasley
    Chrysler Tech
     
    maxpower, Jul 22, 2006
    #2
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.