1993 LeBaron

Discussion in 'LeBaron' started by Dave Archambault, Oct 1, 2003.

  1. I have the basic instrument panel in my 1993 LeBaron and want to swap
    over to the more detailed panel with all guages and a tach, or even to
    the digital panel. My question is, are the LeBarons pre-wired to
    accept any panel, is the wiring the same for all panels, or am I out
    of luck??

    TIA for any help..............................Dave
     
    Dave Archambault, Oct 1, 2003
    #1
  2. They're not prewired to accept any panel -- wiring is NOT present for
    gauges not originally in the car. Electronic panel uses totally different
    wiring, too. You can do this kind of swap, but it's a bigger deal than you
    hope.

    DS
     
    Daniel J. Stern, Oct 1, 2003
    #2
  3. I agree with Daniel in that a digital display is unlikely. In the link
    below, the person was able to change to another panel giving him a
    tach, along with oil pressure and voltage guages. He has detailed
    pictures and instructions.

    http://lebaron.n3.net/

    Kirk Matheson
     
    Kirk Matheson, Oct 3, 2003
    #3
  4. Dave Archambault

    MWinkle353 Guest

    The heck they're not. I did mine and had to do no rewiring.

    It's a direct drop in. However if you want to keep the same milage on your car,
    you'll have to break apart the assembly and replace the speedometer/odometer
    assembly. Spikey has an excellent writeup about the proceedures. You can find
    his page using an internet search for lebaron and his last name. I just can't
    remember the link off the top of my head..


    Wink
    93 Lebaron Conv 3.0L
    Project "Headless Horseman"
     
    MWinkle353, Oct 4, 2003
    #4
  5. Thanks for the help.
     
    Dave Archambault, Oct 5, 2003
    #5
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.