1991 dodge dynasty-setting the clock

Discussion in 'General Motoring' started by Rebecca Dent, Dec 15, 2003.

  1. Rebecca Dent

    Rebecca Dent Guest

    Hi, I just bought a 1991 Dodge Dynasty and cannot figure out how to set the
    clock. I don't know if anyone could help me with it or not but thought I
    would try here.
    Thanx
     
    Rebecca Dent, Dec 15, 2003
    #1
  2. Rebecca Dent

    Mike Martin Guest

    Depends on which type of unit you have installed. If it is the standard
    AM/FM Cassette - Let's see if I can remember the sequence. Key on/or car
    running. Radio on, press SEL to make sure time is showing, not station.
    Press SET once, the display should show P (program), press SEL and display
    should change to show current clock HOURS only. Turn tuning knob to increase
    or decrease HOURS to correct hour. Press SEL again and display should change
    to show current clock minutes. Again turn tuning knob up or down to adjust
    minutes to correct time. Press SEL again to exit.

    If that doesn't work, let me know, and I'll have to go out and check it.
     
    Mike Martin, Dec 16, 2003
    #2
  3. Rebecca Dent

    Mike Martin Guest

    Depends on which type of unit you have installed. If it is the standard
    AM/FM Cassette - Let's see if I can remember the sequence. Key on/or car
    running. Radio on, press SEL to make sure time is showing, not station.
    Press SET once, the display should show P (program), press SEL and display
    should change to show current clock HOURS only. Turn tuning knob to increase
    or decrease HOURS to correct hour. Press SEL again and display should change
    to show current clock minutes. Again turn tuning knob up or down to adjust
    minutes to correct time. Press SEL again to exit.

    If that doesn't work, let me know, and I'll have to go out and check it.
     
    Mike Martin, Dec 16, 2003
    #3
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.