1987 Fifth Avenue - Power Window = Dead

Discussion in 'General Motoring' started by Steve Reinis, Jan 20, 2004.

  1. Steve Reinis

    Steve Reinis Guest

    1987 Chrysler Fifth Avenue with power windows and locks. Driver's Side rear
    window is inop. The motor runs, but the window stays stationary. I
    haven't yet pulled the door panel to inspect things.

    Am I going to find the motor and regulator welded or riveted in, or can I
    remove it and hopefully replace plastic bushings in the regulator like one
    can do on older Ford vehicles?

    Thanks,
    -Stee
     
    Steve Reinis, Jan 20, 2004
    #1
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. '87 Fifth Avenue - Power Antenna = Dead

  2. Ditching LeanBurn on a 1987 Fifth Avenue

  3. '87 Fifth Avenue - Running too cold?

  4. 1987 Fifth Avenue - VERY Rich at Warm-Up

  5. 1987 Fifth Avenue - Lean Burn Question

  6. LeanBurn Conversion is Done! 1987 Fifth Avenue

  7. Removing 1987 Fifth Avenue Door Panels

  8. '03 T&C power window dead

Loading...