1977 Dodge Tradesman 200 - Turn/hazard signal problem

Discussion in 'General Motoring' started by Paul Johnson, Nov 12, 2007.

  1. Paul Johnson

    Paul Johnson Guest

    I've got an interesting problem I'm trying to resolve with my Dodge
    Tradesman. The hazard flashers do not work properly.

    Symptoms:

    * Key off, hazard on or off, turn signal on or off: No flashers.
    * Key on, hazard on, turn signal on: Hazard flashes.
    * Key on, hazard off, turn signal on: Turn signal flashes.
    * Key off, hazard on, turn signal on or off: No flashers.

    Where should I start looking to make the hazard flashers always work
    if they're turned on, no matter what position the key or the turn
    signal lever is in?
     
    Paul Johnson, Nov 12, 2007
    #1
  2. Paul Johnson

    sqdancerLynn Guest

    My guess would be the turn signal switch is worn out
     
    sqdancerLynn, Nov 15, 2007
    #2
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. T&C 96....turn signal problem

  2. Plymuth Acclaim Turn Signal Problem

  3. Turn Signal, 2000 Dodge Caravan

  4. Seeking side door for 1975 Tradesman 100

  5. 93 Intrepid hazard flasher switch problem

  6. T&C turn signal problem

  7. T&C Turn Signal Problem

  8. Turn signal problem - Dodge Durango

Loading...