Oil pan removal procedure '92 lebaron 3.0 conv

Discussion in 'LeBaron' started by Irishstew, Mar 18, 2024.

  1. Irishstew

    Irishstew

    Joined:
    Mar 18, 2024
    Messages:
    1
    Likes Received:
    0
    Hi all, unfortunately hit a rock and cracked my oil pan. It needs replaced and I can only do this in my driveway. Does anyone know how to do this? Or can you provide any hints, tips or tricks? I read that the front end of the car has to be raised and that the engine mounts have to be removed and the engine supported either from above with a hoist or from underneath with a jack. I want to do this safely and I'm hoping that someone out there has done this before and can shed some light on it for me. Thank you all and thanks for any replies in advance.
     
    Irishstew, Mar 18, 2024
    #1
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Lebaron contrible Hydraulics - Refilling Procedure ???

  2. 95 lebaron conv rear windows

  3. 1987 Chrysler LeBaron Oil Pan Gasket

  4. 95 LeBaron Conv Top

  5. 85 Lebaron conv top too tight

  6. 1990 LeBaron Conv - Left turn signals don't flash. I need help. Any guidance?

  7. Headlight Low/High beam question for 92 Lebaron Conv.

  8. Transmission Pan Removal

Loading...