Lebaron Turn Signal Sound Too Soft

Discussion in 'LeBaron' started by Larry, Sep 30, 2003.

  1. Larry

    Larry Guest

    Does anyone know how to increase the sound of the turn signal on the
    '89 Lebaron. I can barely hear mine, especially with the radio on
    and/or top down. I thought the sound was controlled by the flasher
    can in the fuse panelr, but the trund signal still sounds even after
    that is removed.

    Thanks in advance.
     
    Larry, Sep 30, 2003
    #1
  2. Larry

    Daniel J. Stern Guest

    There are two flasher cans - one is for the hazard (4-way) blinkers and
    the other is for the turn indicators. I use the Ideal/Tridon EL12C or
    LF12C electronic flasher for a nice loud click. Make sure the flasher can
    is all the way seated in its bracket -- it needs whatever part it's
    mounted to in order for you to hear the click!

    DS
     
    Daniel J. Stern, Sep 30, 2003
    #2
  3. Larry

    Larry Guest

    Thanks for the help Dan. I didn't know there was another can for the
    turn signal. The one I changed, using an LF12, was on the lower left
    hand corner of the fuse panel. Can you tell me where the turn signal
    can is relative to that one?

    Thanks very much.
     
    Larry, Sep 30, 2003
    #3
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Left hand turn signal DOA

  2. 2002 Dodge Stratus (fast clicking sound when trying to turn over)

  3. '95 LHS Turn Signal/Hazards dead after tranny rebuild

  4. T&C 96....turn signal problem

  5. 1997 Intrepid turn signal problems

  6. Turn signal fixed...

  7. 94 Lebaron.. Turn signal problems

  8. Brand Breakdown: Too Many Models, Too Little Innovation Destroyed Detroit's Customer Loyalty

Loading...